Skip to main content

operating water solenoid valve not function

Operating water solenoid valve malfunctioning.
Causes and remedy
1. Control unit is defective.
Action:  contactact service backup support. 
2. Wire break in the connecting terminal. 
Action: Replace wire. 
3. Connecting terminal on the connector block is loose.
Action: tighten the screw of terminal.
4. Coupler socket loose.
Action l: tighten coupler socket. 
5. Magnetic coil defective.
Action: Replace the solenoid head. 
6. Diaphragm defective. 
Action: Replace diaphragm. 


Comments

Popular posts from this blog

Wire drawing effect

Wire drawing effect : It is erosion or scoring of valve seat and disc material of the valve . Causes : 1. Due to differential pressure across the valve . 2. Thermal and mechanical damages . Effects : Valve is unable to isolate the line and fails in sealing . Gas and liquid will leak from the wire and scratch like groove .

Difference between Attemperator and De-superheater

Attemperator are fitted in order to keep the steam temperature in the final stages of the superheater within certain desired limits . This is done for two main reasons . 1. The most important is the protection of the superheater tube material from the effects of overheating. *Mild steel superheater tubes tubes should not be subjected to steam temperatures in excess of 455℃. 2. The formation of bonded deposits on superheater tubes can be reduced if steam and gas streams within certain temperature ranges are prevented from coming into contact of each other. De-Superheater is used to reduce the temperature of a quantity of superheated steam and make it suitable for used in auxiliary services requires low temperature or saturated steam . *The reason for doing this way rather than by taking the saturated steam direct from steam drum , is to protect the superheater , these must be protected against overheating under all conditions of load by circulating steam through them . *Al...