Skip to main content

Why Distilled water is not circulated in the pipelines ?

1.Why Distilled water is not circulated in the pipelines ?

Ans. In Fwg distilled water is generated still it is not directly used in Boiler without chemical dosing even it is free from contaminants .
The reason to the question is distilled water ready absorption carbon dioxide and tends to become slightly acidic which can cause corrosion .

2. What is the highest temperature at which a fuel of 60 deg Flash point should be heated to achieve a certain viscosity?

Ans. Less than 20 deg of its Flash point i.e 40 deg . And the reason is near its flash point tempeature fuel starts to vaporise

3. What is the percentage water of get distillated from 100% of sea water?

Ans. It is around  50% rest do formation of brine , scale of carbonates and bicarbonates .

Labels:

Comments

Post a Comment

Popular posts from this blog

Difference between Attemperator and De-superheater

Attemperator are fitted in order to keep the steam temperature in the final stages of the superheater within certain desired limits . This is done for two main reasons . 1. The most important is the protection of the superheater tube material from the effects of overheating. *Mild steel superheater tubes tubes should not be subjected to steam temperatures in excess of 455℃. 2. The formation of bonded deposits on superheater tubes can be reduced if steam and gas streams within certain temperature ranges are prevented from coming into contact of each other. De-Superheater is used to reduce the temperature of a quantity of superheated steam and make it suitable for used in auxiliary services requires low temperature or saturated steam . *The reason for doing this way rather than by taking the saturated steam direct from steam drum , is to protect the superheater , these must be protected against overheating under all conditions of load by circulating steam through them . *Al...
Post a Comment
Read more

REGULATION FOR THE DISCHARGE OF SEWAGE ONBOARD SHIP

Regulation for the Discharge of Sewage  According to Marpol (73/78) annex  IV   , prevention of pollution from sewage it has 11 regulation according to Marpol consolidation 2002. Regulation 1 deals with basic definition of new ship, existing ship , sewage , nearest land etc. Regulation 2 deals with application of this convention on different types of ship based on their tonnage and number of crew capacity. Regulation 3 deals with various types of surveys which is conducted initially from the ship construction to operational level. Regulation 4 deals with the  issuing of ISPP (International Sewage Pollution Prevention ) certificate. Regulation 5 deals with issuing of certificate by another government i.e, there is no issue of ISPP certificate to flag which is not the party of organisation . Regulation 6 deals with the forms of certificate i.e ISPP certificate shall be drawn in official language of issuing country if the issuing country official langua...
2 comments
Read more