Skip to main content

Safety and Electrical

20-03-2019
Pratiksha Bhavan

Function 3 & 5

Function 3
1-What is LRIT?
2-What is there in BDN?
3-what is IMDG?
4-what is type A and type B vessel according to freeboard?
5-what is bitter end & draw the arrangement how it connected to bulkhead?
6-What is sheerstrake draw
7-Types of bulkhead? What type of bulkhead is there is E/R

Function 5
1- Reverse power Trip?
2-Types of fuses? What is HRC fuses?
3-Types of emergency battery?
4-what is prefential trip?
5-safety of MSB?
6-What is IP and give example of which have IP?
7-Speed controller of motor and formula for speed of motor?

Labels:

Comments

Post a Comment

Popular posts from this blog

Wire drawing effect

Wire drawing effect : It is erosion or scoring of valve seat and disc material of the valve . Causes : 1. Due to differential pressure across the valve . 2. Thermal and mechanical damages . Effects : Valve is unable to isolate the line and fails in sealing . Gas and liquid will leak from the wire and scratch like groove .
Post a Comment
Read more

Cross and loop scavenging Disadvantage

Cross scavenging Disadvantage 1. It requires longer  piston skirt to prevent exhaust gas and air leaks from the ports when piston is at TDC . Loop scavenging Disadvantage 1. Both exhaust port and scavenge port are at the adjacent side of the liner which causes temperature differential problem for the liner material . Hence , we are using mostly the uniflow scavenging which is having very lesser mixing and better scavenging efficiency. Source : DA Taylor
Post a Comment
Read more